Last Updated: November 16, 2026
Quick Summary
Landlords in the UK must keep all gas appliances, pipework and flues in a safe condition, which means arranging gas safety repairs promptly and paying for faults they are responsible for. The landlord carries this legal duty even when a tenant reports the fault or caused the damage. Gas safety repairs must be carried out by a Gas Safe registered engineer.
- Landlords must arrange a gas safety check every 12 months by a Gas Safe registered engineer.
- Give tenants a copy of the gas safety record within 28 days of each check.
- Keep a record of each gas safety check for at least two years.
- Treat any report of a gas smell as an emergency and call 0800 111 999 first.
- Tenants must give reasonable access for the annual check and safety-related repairs.
Table of Contents
- What the Landlord Must Do Under UK Gas Safety Law
- Gas Safety Check Frequency for Landlords: The 12-Month Cycle
- Landlord Gas Safety Certificate: What the CP12 Must Contain
- Landlord Boiler Repair Responsibilities and Who Pays
- What to Do When a Tenant Reports a Gas Leak
- Handling Tenant Access Refusals and Failed Safety Checks
- Booking Your Next Gas Safety Check With a Gas Safe Engineer
- Frequently Asked Questions
What the Landlord Must Do Under UK Gas Safety Law
Landlords in the UK have a legal duty to keep gas appliances, fittings and flues in a safe condition, and meeting that duty means keeping on top of gas safety repairs (Gas Safety (Installation and Use) Regulations 1998 (GSIUR) as amended. Approved Code of…).
The law puts the responsibility on the landlord, not the tenant. Even if a tenant reports a fault or caused damage, the landlord must make sure the work is done safely.
Here is what the landlord must do:
- Ensure all gas appliances, pipework and flues are maintained in a safe condition
- Keep a record of each check for at least two years (Gas safety check records and what to keep)
- Give a copy of the safety record to tenants within 28 days of the check (Private renting: Your landlord’s safety responsibilities)
A common mistake is assuming the tenant will arrange the check. The duty stays with the landlord at all times.
Gas Safety Check Frequency for Landlords: The 12-Month Cycle
Landlords must arrange a gas safety check every 12 months (Private renting: Your landlord’s safety responsibilities). The clock starts from the date of the last check, so plan the next one before the current certificate runs out.
Many landlords book the next check early to give a small buffer if the engineer cannot attend on the exact day.
- Check the date on the existing CP12 certificate
- Book the next visit at least a month before it expires
- Set a reminder on your phone or calendar
Landlord Gas Safety Certificate: What the CP12 Must Contain
The landlord gas safety certificate, known as the CP12, records the results of the annual check.
A valid CP12 should list each appliance, its location, and whether it passed or failed.
Check that the certificate includes:
- The property address and landlord details
- Each gas appliance tested, such as a boiler, cooker or gas fire
- The result for each appliance and any defects found
Keep the original, and give tenants a copy within 28 days of the check. Beyond the certificate, see the records to keep after gas appliance repairs.
The table below sets out what a valid CP12 should show, so you can check the certificate before you give it to tenants.
| Item | What to check | Note |
|---|---|---|
| Property address | Matches the rented property | Include landlord details |
| Appliances tested | Each gas appliance listed | Such as a boiler, cooker or gas fire |
| Result per appliance | Pass or fail recorded | Note any defects found |
| Engineer details | Name, Gas Safe number, signature | Confirms registered engineer |
| Inspection date | Date of the check | Starts the 12-month cycle |
| Copy to tenants | Within 28 days of the check | Keep the original |
Landlord Boiler Repair Responsibilities and Who Pays
The landlord usually pays for repairs to gas appliances they supply, including the boiler. This covers most faults that affect safety or normal use, and it applies whether the fault is reported by the tenant or found during a service.
Tenants can be responsible for damage they cause through misuse or neglect. The lease or tenancy agreement sets out the detail, so read it carefully, but the landlord still carries the legal duty to keep the installation safe.
Repair Triage: Which Faults Need Urgent Attention
Not every fault needs an emergency call-out, but some do. Sort faults by risk so you know how fast to act. The legal duty is to keep the installation safe, and a suspected leak or unsafe appliance should always be treated as an emergency.
- Emergency, act immediately: a smell of gas, signs of carbon monoxide (yellow flames, sooty marks, headaches or drowsiness reported by tenants), a boiler that has locked out with a gas smell, or any engineer warning that an appliance is immediately dangerous. Ask the tenant to stop using the appliance, open windows, avoid switches and flames, and call the National Gas Emergency Service on 0800 111 999 before calling anyone else.
- Urgent, same day or next working day: no heating or hot water in cold weather, a pilot light that repeatedly goes out, a boiler leaking water near electrics, or a flue that has become disconnected. Arrange a Gas Safe registered engineer and give the tenant a realistic attendance window.
- Soon, within a few working days: unusual noises, fluctuating pressure, radiators that will not heat, or a cooker burner that lights unevenly. These are rarely immediately dangerous but should not be left indefinitely.
Watch out: a tenant describing a “small gas smell” is not a routine repair, treat every gas odour report as an emergency until a Gas Safe engineer confirms otherwise.
Component Responsibility Map for Gas Systems
Different parts of a gas system carry different responsibilities. The map below is a simple guide, but your tenancy agreement and the engineer’s report have the final say.
- Boiler and gas appliances: landlord, unless the tenant caused the damage through misuse or neglect.
- Flues and ventilation: landlord. Blocked or damaged flues are a safety issue and must be addressed promptly.
- Internal pipework: landlord, up to the point of the gas meter. Pipework inside the property is part of the landlord’s installation.
If the boundary is unclear, ask the Gas Safe engineer to note it on the report. That record is useful if a dispute arises later about who should pay.
What to Do When a Tenant Reports a Gas Leak
If a tenant reports a gas smell, act straight away. Ask them to open windows, avoid using switches or flames, and leave the property.

Then contact the National Gas Emergency Service on 0800 111 999, which is free and open all day. For urgent local help with leaks and repairs across Gillingham, Medway and Kent, contact emergency plumbing services for a fast response.
Once the risk is over, arrange a full inspection by a Gas Safe registered engineer. Keep a written record of the report, the response and the repair.
Handling Tenant Access Refusals and Failed Safety Checks
Tenants must give reasonable access for the annual check and for any safety-related repair. If a tenant refuses or cannot provide access, the landlord should follow a documented sequence rather than simply turning up or giving up.
A Documented Sequence for Access Problems
- Write to the tenant explaining the legal duty to arrange the check, the date the current certificate expires, and why access is needed. Offer at least three alternative dates and times, including an evening or weekend slot if possible.
- Record every attempt. Keep copies of letters, emails, text messages and notes of phone calls, including the dates and times you offered.
- Follow up in writing if there is no response, and set a clear deadline for the tenant to confirm a date.
- Consider the reason. If the tenant cannot provide access because of illness, work commitments or a vulnerability, offer to rearrange rather than escalate. Reasonableness works both ways.
- Seek advice before taking further action. The rules on entry are strict, and a landlord cannot simply enter without permission or a legal basis. Take advice from a landlord association or solicitor before considering any escalation.
Watch out: do not treat a tenant’s silence as consent to enter. Keep the paper trail and get advice before any step that could be seen as forced entry.
Step-by-Step Response to an Unsafe Appliance or Failed Check
If a gas safety check fails, or an engineer identifies an unsafe appliance, the response should follow a clear sequence: if you need to know how to report an unsafe gas engineer, that guide sets out the steps.
- Take the engineer’s advice immediately. If the appliance is classified as immediately dangerous, it should be isolated or disconnected, and the tenant should be told not to use it.
- Confirm the isolation in writing. Ask the engineer to record what was done, and keep a copy of the warning notice or report.
- Arrange the repair with a Gas Safe registered engineer as soon as possible, prioritising anything that affects heating, hot water or safety.
- Have the appliance retested after repair, and obtain an updated record showing the outcome.
- Communicate with the tenant about what has happened, what they should not use in the meantime, and when the repair will take place.
- Update your records so the next annual check and any follow-up work are diarised.
A failed check does not automatically mean the whole property is unsafe, but it does mean the affected appliance must not be used until it is repaired and retested. Read the specific next steps for remedying a failed gas safety check for the full retest process.
Booking Your Next Gas Safety Check With a Gas Safe Engineer
Staying on top of gas safety is simpler when you book early and keep records in one place. You can book professional boiler servicing from Gas Safe registered engineers across Gillingham, Medway and Kent.
For current availability and a quote, contact Major Heat directly through their website.
Quick Answers
How often must a landlord get a gas safety check?
Every 12 months, by a Gas Safe registered engineer.
Who pays for boiler repairs in a rented home?
The landlord usually pays, unless the tenant caused the damage.
How long should landlords keep gas safety records?
Keep them for at least two years.
Frequently Asked Questions
Who is responsible for repairing a boiler in a rented property?
In most rented properties the landlord must keep gas appliances, flues and pipework supplied with the tenancy in a safe condition, which includes repairing a faulty boiler. Under the Gas Safety (Installation and Use) Regulations 1998, the landlord has a legal duty to maintain these items in good repair and safe working order. Tenants are generally expected to report faults promptly and to avoid damaging equipment. If a boiler breaks down through normal wear, the landlord should arrange a Gas Safe registered engineer to diagnose and repair it. Keep written records of every repair request and the work carried out.
How often must a landlord arrange a gas safety check?
A landlord must arrange a gas safety check by a Gas Safe registered engineer at least every 12 months for every gas appliance, flue and pipework they provide. The check should be carried out within 12 months of the previous one, and many landlords book it up to two months early so the date does not slip. The engineer completes a Gas Safety Record, commonly called a CP12, which the landlord must give to each tenant within 28 days of the check or before a new tenant moves in. Keep copies of these records for at least two years.
What should a tenant do if they smell gas in a rented home?
A tenant who smells gas should open windows and doors, avoid using naked flames, electrical switches or phones inside the property, and turn off the gas at the emergency control valve if it is safe to do so. They should then call the National Gas Emergency Service on 0800 111 999 straight away, from outside the property. The tenant should also notify their landlord as soon as they are safe. The landlord must then arrange urgent inspection and repair by a Gas Safe registered engineer before the appliance is used again.
Does a landlord have to provide a gas safety certificate to tenants?
Yes. A landlord must give each tenant a copy of the current Gas Safety Record (CP12) within 28 days of the gas safety check being completed, and before any new tenant moves in. The certificate should show the date of the check, the appliances tested, and the engineer’s details, including their Gas Safe registration number. Landlords should keep a copy of each record for at least two years. Failing to provide the certificate is a breach of the Gas Safety (Installation and Use) Regulations 1998.
